SafeZone Series SZ-412
Springless Sign Stand
The SafeZone Series SZ-412 is a super lightweight compact springless sign stand for use with roll-up signs. Easy to use and easy to store, its single sign attachment point allows for quick deployment in the field. Telescopic legs with both pull pin and kick release levers can be released by hand or foot for fast set-up. Independently adjustable legs with three height adjustments for uneven terrain makes for ease of use along right of ways and medians. The SZ-412 is as safe as it is functional.
The SZ-412 is the right choice for Utility Companies, DOT’s, Cities, Counties, Governments or anyone working along secondary roads or inner city streets.
Features:
- Lightweight design / 20 lbs
- Compact for ease in storage / less than 1 cubic foot when stored
- Springless design
- Over-sized pull pins and kick release for quick release of legs
- 3 Separate height adjustments for uneven terrain
- Bright orange legs for extra visibility on curbs & sidewalks
- Powder-coated and zinc plated for maximum corrosion resistance
- Meets minimum height requirement as set forth in the MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES (MUTCD)
-
NCHRP-350 tested and certified (with roll-up signs)
SafeZone Series SZ-412-FX
Fixed Leg Stand
The SafeZone Series SZ-412-FX has the same characteristics as the SZ-412 except the legs are fixed length (FX).
Features:
- Lightweight design / 20 lbs
- Compact for ease in storage / less than 1 cubic foot when stored
- Springless design
- Over-sized pull pins and kick release for quick release of legs
- 3 Separate height adjustments for uneven terrain
- Bright orange legs for extra visibility on curbs & sidewalks
- Powder-coated and zinc plated for maximum corrosion resistance
- Meets minimum height requirement as set forth in the MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES (MUTCD)
-
NCHRP-350 tested and certified (with roll-up signs)
[/three_columns] [three_columns]
SafeZone Series SZ-412-S
Single Spring Stand
The SafeZone Series SZ-412-S is the single spring-loaded version of our popular SZ-412. The single coil spring adds additional weight and redundancy to compensate for increased wind loads. The SZ-412-S is primarily used along the sides of state highways and interstates where wind loads are greater and more frequent.
SafeZone Series Sign Stands are lightweight and require a minimum of space in your vehicles. They are easy to carry for setup and deployment of your roll-up signs.
The SZ-412-S is ideal for Utility Companies, Mowing Crews, Road Contractors & Underground Boring Companies using roll-up reflective and mesh signs.
[/three_columns][three_columns last]
Features:
- Lightweight design / 23 lbs.
- Compact for ease in storage / less than one cubic foot when stored
- Single Spring Design
- Both pull pin and kick release of legs
- 3 separate height adjustments for uneven terrain
- Bright orange colored legs for extra visibility on curbs and sidewalks
- Powder -coated and zinc plated for maximum corrosion resistance
-
Meets minimum height requirement as set forth in the MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES (MUTCD)
-
NCHRP-350 tested and certified (with roll-up signs)
[/three_columns last]
[three_columns first]
[/three_columns] [three_columns]
SafeZone Series SZ-412-S-FX
Single Spring Fixed Leg Stand
The SafeZone Series SZ-412-S-FX has the same characteristics as the SZ-412-S except the legs are fixed length (FX).
[/three_columns][three_columns last]
Features:
- Lightweight design / 23 lbs.
- Compact for ease in storage / less than one cubic foot when stored
- Single Spring Design
- Both pull pin and kick release of legs
- 3 separate height adjustments for uneven terrain
- Bright orange colored legs for extra visibility on curbs and sidewalks
- Powder -coated and zinc plated for maximum corrosion resistance
-
Meets minimum height requirement as set forth in the MANUAL ON UNIFORM TRAFFIC CONTROL DEVICES (MUTCD)
-
NCHRP-350 tested and certified (with roll-up signs)
[/three_columns last]
[three_columns first]
[/three_columns] [three_columns]
SafeZone Series SZ-412-2S
Dual Spring Stand
It’s the first SafeZone Series Sign Stand designed to accommodate both rigid & roll-up signs. Dual coil springs and a wide base allow the SZ-412-2S to withstand heavy winds without additional sandbags or ballast. The SZ-412-2S is a great choice for anyone who needs rigid sign capabilities or transitions from rigid signs to roll-up signs.
DOT’s, Telco’s, Power Utilities, Road Contractors, Underground Utility Contractors & Barricade Rental companies.
[/three_columns][three_columns last]
Features:
- Easy storage
- Dual coil spring design
- Both pull pin and kick release of legs
- 3 separate height adjustments for uneven terrain
- Bright orange colored legs for extra visibility on curbs and sidewalks
- Outdoor UV powder-coated and zinc plated for maximum corrosion resistance
- Weight 37 lbs.
- Approved for roll up signs or rigid signs up to 48” x 60“
[/three_columns last]
[three_columns first]
[/three_columns] [three_columns]
SafeZone Series SZ-412-X
Springless Stand
The SZ-412-X is the newest in a long line of proven lightweight, compact, portable rigid sign stands from Bone Safety Signs. The newly designed Rigid Bracket enables the stand to be closed without removing the sign and our easy-to-use pillpin or kick release lever are used for quick setup and take down.
DOT’s, Telco’s, Power Utilities, Road Contractors, Underground Utility Contractors & Barricade Rental companies.
[/three_columns][three_columns last]
Features:
- Easy storage
- Fixed Legs
- Both pull pin and kick release of legs
- 3 separate height adjustments for uneven terrain
- Bright orange colored legs for extra visibility on curbs and sidewalks
- Outdoor UV powder-coated and zinc plated for maximum corrosion resistance
- Weight 20 lbs.
- Approved for roll up signs up to 48” x 60“
[/three_columns last]
